FED · 50mm f/2.8 · M39

FED Industar-26M 50mm f/2.8 (LTM)

35mm Prime f/2.8 Discontinued Tessar type · FED-2 kit lens · 10-blade aperture · flare prone · needs a hood · budget rangefinder fifty

Roughly 725,000 of these left the FED works in Kharkov between 1957 and 1959 alone. Series production had only begun in 1957, so the factory was turning out the Industar-26M at a pace that still shapes the market: it is one of the easiest Leica thread fifties to find, and it usually arrives already mounted on a FED-2. Supply keeps the price low. Condition varies widely after sixty years, so check the glass and the focus action before buying.

The design is a Tessar type, four elements in three groups, set in a rigid barrel with an aperture scale from f/2.8 to f/22. Against the f/3.5 Industars that Krasnogorsk fitted to Zorki bodies, that is two thirds of a stop gained, and against the collapsible ones there is no tube to pull out and lock. Against the Jupiter-8, the usual kit lens of the Zorki-4, it is a full stop slower and a good deal simpler inside. Later examples are engraved I-26M 2,8/52, a hint that the true focal length sits a little past the nominal 50mm. It stayed the standard lens of the FED-2 and the early FED-3 until the Industar-61 began replacing it from 1962.

Owners report what a Tessar layout usually delivers: a sharp centre with softer corners at f/2.8, then an even, crisp frame once the lens is stopped down to f/5.6 or f/8. Most of its good pictures get made there. They also describe moderate contrast, which suits black and white film in hard light. The diaphragm has ten blades, more than most later standard lenses carry, so the opening stays close to round all the way to f/22 and out-of-focus highlights keep their shape where a five or six blade lens would turn them into polygons.

Flare is the price. Light coming from the side or from behind the subject washes across the frame and takes the shadows with it, so a scene that looked punchy in the finder comes back grey. A hood fixes most of it and is close to mandatory outdoors. Much of the disagreement between owners about this lens comes down to whether the front element was shaded when the picture was taken.

Today it suits street and travel work at middle apertures, where a light, rigid fifty is all the job asks for. Cross-shopping tends to run two ways: against the Industar-61 line that replaced it, best known now as the lanthanum glass L/D version, which owners generally find contrastier, and against the Jupiter-8 for anyone who wants the extra stop. People still buy the 26M because it costs very little and because it is the lens a FED-2 was sold with. People avoid it for the flare, and because a neglected copy can cost more to service than to replace.

The bodies it was sold with have no meter, so every frame starts from a handheld reading. Take the exposure in Zone Light Meter and set it by hand. When the light drops, f/2.8 is as wide as it opens, so let the shutter speed carry the rest. In backlight, shade the front element before trusting a shadow placement, because flare will lift those low zones on the negative whatever the reading said.

How the app handles this lens

  • Metering: Max aperture f/2.8. Meter wide open in dim light, then the app holds the reading while you stop down to your taking aperture.
  • Shutter: The shutter is in the body (focal plane), so flash sync tops out at the camera's X-sync speed. The app's exposure pairs respect whatever speed you set.

Frequently asked questions

What mount is the FED Industar-26M 50mm f/2.8 (LTM)?

The FED Industar-26M 50mm f/2.8 (LTM) is a M39 mount lens for 35mm cameras.

Is the FED Industar-26M 50mm f/2.8 (LTM) a prime or a zoom?

It is a 50mm prime.

How fast is the FED Industar-26M 50mm f/2.8 (LTM)?

Its maximum aperture is f/2.8, stopping down to f/22.

Is the FED Industar-26M 50mm f/2.8 (LTM) discontinued?

Yes, it is out of production (made 1957-1968) and found on the used market.

More from FED

Cameras for the M39 mount

See every M39 lens

This article was drafted with AI from researched sources and checked against manuals and maker data. Nobody here has hands-on tested every item. How the articles are made. Spotted a mistake? Write to hello@zonelightmeter.com.

Related reading

← Back to the full lens list

Search documentation