KMZ · 50mm f/3.5 · M39

KMZ Industar-22 50mm f/3.5 (collapsible, LTM)

35mm Prime f/3.5 Discontinued collapsible · Tessar type · pocketable · no filter thread · moderate contrast · Zorki standard lens

Krasnogorsk needed a standard lens for its new Leica-thread camera, and the State Optical Institute already had one on paper. GOI computed the Industar-22 in 1945: four elements in three groups, a Tessar type, set in a collapsible tube that follows the Elmar pattern. KMZ put it into production in 1948 as the lens the first Zorki cameras left the factory with, and KOMZ in Kazan also built some in 1949 and 1950. Production ran until about 1958.

The collapsible tube explains why the lens looks the way it does. Push the tube in and a Zorki is far flatter than one wearing a Jupiter-8, and at about 80g the lens adds very little to the weight of the camera. The compactness comes with a step that cannot be skipped. Before shooting, the tube has to be pulled all the way out and locked. If the tube is not locked it can move back and the frame will be out of focus, and the viewfinder gives no warning.

On film it has the reputation of a modest, honest standard lens. As with Tessar types generally, the corners improve on stopping down, and the middle of the aperture scale is where most people use it. Contrast is moderate next to modern glass, which suits black and white film well. As with most lenses of its age, strong light from the front lowers contrast, so shade the front element when you can. Out of focus areas are plain, and at f/3.5 there is not much blur to judge anyway. The scale stops at f/16.

The awkward part is filters. The collapsible Industar-22 has no filter thread at all, so anything in front of the glass has to be a push-on fitting over the rim, and the aperture is set at the front of the lens, where a filter or hood crowds your fingers. If you do slip a yellow or orange filter on for black and white, the meter has no idea it is there: enter the filter factor in Zone Light Meter so the reading already includes the lost light. The other limit is speed. With ISO 100 film indoors, f/3.5 runs out of usable shutter speeds quickly. Later Zorki bodies were offered with the f/2 Jupiter-8, while the Industar-50 carried on as the f/3.5 option.

That Industar-50 is the recomputed successor of the same Tessar type, and it took over in both collapsible and rigid barrels. This article covers the collapsible rangefinder Industar-22; a rigid version also existed. The Leica Elmar 50mm f/3.5 is the obvious reference point, but only for the barrel. The collapsible mount copies the Elmar's, while the optics are a GOI Tessar-type computation, not a copy of the Leitz formula.

Today it is among the cheapest ways into Leica thread, often sold still attached to the Zorki it came with. Much of the demand comes from people completing an early body, and the rest from photographers who want a small daylight camera for travel and street work. Condition varies a great deal after seventy years, so look through the glass for haze and cleaning marks before paying, and make sure the tube locks firmly when extended.

How the app handles this lens

  • Metering: Max aperture f/3.5. Meter wide open in dim light, then the app holds the reading while you stop down to your taking aperture.
  • Shutter: The shutter is in the body (focal plane), so flash sync tops out at the camera's X-sync speed. The app's exposure pairs respect whatever speed you set.

Frequently asked questions

What mount is the KMZ Industar-22 50mm f/3.5 (collapsible, LTM)?

The KMZ Industar-22 50mm f/3.5 (collapsible, LTM) is a M39 mount lens for 35mm cameras.

Is the KMZ Industar-22 50mm f/3.5 (collapsible, LTM) a prime or a zoom?

It is a 50mm prime.

How fast is the KMZ Industar-22 50mm f/3.5 (collapsible, LTM)?

Its maximum aperture is f/3.5, stopping down to f/16.

Is the KMZ Industar-22 50mm f/3.5 (collapsible, LTM) discontinued?

Yes, it is out of production (made 1948-1958) and found on the used market.

More from KMZ

Cameras for the M39 mount

See every M39 lens

This article was drafted with AI from researched sources and checked against manuals and maker data. Nobody here has hands-on tested every item. How the articles are made. Spotted a mistake? Write to hello@zonelightmeter.com.

Related reading

← Back to the full lens list

Search documentation