KMZ · 50mm f/3.5 · M39

KMZ Industar-50 50mm f/3.5 (LTM)

35mm Prime f/3.5 Discontinued Tessar type · Collapsible or rigid · Slow f/3.5 · 33mm filters · Zorki standard · Budget rangefinder

It is marked as a 50 and measures closer to 52mm, a small overshoot that was ordinary for standard lenses of the period. The Industar-50 is a coated Tessar type, four elements in three groups, and f/3.5 asks very little of that design. The centre is crisp from full aperture, the corners catch up a couple of stops down, and backgrounds stay calm because a 50mm lens at f/3.5 rarely throws much of the frame out of focus.

KMZ put it into production in 1953 as the replacement for the Industar-22 and kept building it for two decades as a standard lens for Zorki bodies. The rangefinder version came in two housings. One is a collapsible tube in the old Leica manner, pulled out and locked before shooting, which lets a Zorki slide into a coat pocket. The other is a rigid barrel that KMZ shared with the Zenit SLR version of the same lens, and this is where buyers get caught. Both carry a 39mm thread, but the Zenit lens has a longer register and no rangefinder coupling, so it will screw onto a Zorki and never reach correct focus. The focus scale tells the two apart: the rangefinder lens stops at 1m, while the Zenit lens runs down to 0.65m.

Stopped to f/5.6 or f/8, a coated Tessar type gives even sharpness across the frame with moderate contrast, and this one follows the pattern. Wide open the edges are softer. As with any single coated lens of the period, a hood helps in strong side light. Seven aperture blades keep highlights reasonably round at middle apertures, though at this speed and focal length there is seldom much background blur to shape.

Speed is what the small barrel costs. At f/3.5 it gives away more than a stop and a half to the Jupiter-8 and about two thirds of a stop to the f/2.8 Industars that FED fitted to its own cameras. On ISO 100 film that pushes you to slow shutter speeds as soon as the light drops. The 1m minimum focus rules out tight head shots. Handling has a catch as well: the aperture is set on a small ring at the front of the lens, where it is awkward to reach with a hood or filter in place.

The filter thread is 33mm, an uncommon size, and filters in that diameter take some finding. Whatever you fit, add its filter factor to the reading; Zone Light Meter applies the factor for you once the filter is entered, which matters when you only have f/3.5 to spend.

It remains one of the cheapest ways to put a coated Tessar on a thread mount rangefinder, usually priced far below the Leica Elmar 50mm f/3.5 it resembles in concept. Buyers who want speed take a Jupiter-8 instead. The Industar-50 suits the photographer who wants a small daylight lens for street and travel work at f/8, and the collapsible version adds a Zorki that still fits a pocket.

How the app handles this lens

  • Metering: Max aperture f/3.5. Meter wide open in dim light, then the app holds the reading while you stop down to your taking aperture.
  • Shutter: The shutter is in the body (focal plane), so flash sync tops out at the camera's X-sync speed. The app's exposure pairs respect whatever speed you set.
  • Filters: Takes 33mm filters. Dial an ND or polariser factor into the app and the metered exposure shifts to match.

Frequently asked questions

What mount is the KMZ Industar-50 50mm f/3.5 (LTM)?

The KMZ Industar-50 50mm f/3.5 (LTM) is a M39 mount lens for 35mm cameras.

Is the KMZ Industar-50 50mm f/3.5 (LTM) a prime or a zoom?

It is a 50mm prime.

How fast is the KMZ Industar-50 50mm f/3.5 (LTM)?

Its maximum aperture is f/3.5, stopping down to f/16. The filter thread is 33mm.

Is the KMZ Industar-50 50mm f/3.5 (LTM) discontinued?

Yes, it is out of production (made 1953-1973) and found on the used market.

More from KMZ

Cameras for the M39 mount

See every M39 lens

This article was drafted with AI from researched sources and checked against manuals and maker data. Nobody here has hands-on tested every item. How the articles are made. Spotted a mistake? Write to hello@zonelightmeter.com.

Related reading

← Back to the full lens list

Search documentation