12.17 Section 12: Frictionless UI & Hands-Free Operation

Simple theme (spot meter)

A classic spot meter: set the ISO and your shutter or aperture, point the circle, read the other.

Where to find it

Settings Theme Simple

Summary

Simple turns the app into a hand-held spot meter and hides everything else. Point the circle in the middle of the viewfinder at a tone, and the display under the picture gives the exposure at your film speed: a switch says whether you set the shutter speed or the aperture, and the meter answers with the other one in big orange numbers. Below it, a sliding scale lines up every shutter speed with its aperture, like the calculator dial of a classic spot meter, in thirds of a stop or, if your lens and shutter click only on whole stops, in whole stops. Tap HOLD to freeze the reading and the picture it was taken on.

How it works

How to read it

Point the circle at the tone you want to expose for. The black strip under the picture is the meter's display: EV on the left, then SHUTTER and APERTURE. The big orange number is the meter's answer; the white one beside it is the value you set. If the display shows 1/250 in white and f/11 in orange, set 1/250 and f/11 on the camera. The EV is the same reading as an exposure value at your film speed. The badge in the top left corner says LIVE while the reading follows the circle, and short hints appear at the bottom of the picture when there is something to say.

YOU SET: shutter or aperture

The switch under the display says which of the two is yours. On Shutter, you choose the shutter speed and the meter answers with the aperture, for when you need 1/500 to stop a cyclist. On Aperture, you choose the f-number and the meter answers with the time, for when you want f/2 for a soft background or f/16 for a landscape on a tripod. Switching keeps the pair on screen. If the meter was saying f/8 at 1/125, tap Aperture and f/8 becomes yours, with 1/125 now the meter's answer. Open up to f/5.6 and the answer moves to 1/250.

The scale

Under the switch sits a sliding scale, the calculator dial of a hand-held meter laid out flat. Shutter speeds run along the top, apertures along the bottom, and every shutter speed stands over the aperture that goes with it for the light in the circle. So 1/125 over f/8 also shows you 1/250 over f/5.6 and 1/60 over f/11: the same exposure, traded between time and depth of field. Whole stops are printed and the two ticks between them are thirds. When the answer is f/6.3, the mark in the middle sits on the first tick past f/5.6, towards f/8, so you can see that the reading falls a third of a stop between the two, and set the lens ring there. Your row is white and clicks in thirds under the mark (in whole stops when STOPS is on 1); the meter's orange row glides as the light changes. Drag the scale sideways to set your value, or tap a value to bring it to the mark. With TalkBack, swipe up or down on the scale to step a third, or a whole stop.

STOPS: whole stops or thirds

Many lenses click only on whole stops, f/8 then f/11, and many shutters only offer 1/125 then 1/250. Set the STOPS switch next to YOU SET to 1 and the meter works the same way: your value clicks only on whole stops, and the answer is the nearest whole stop, so you never see f/9 or f/10 between f/8 and f/11. A value you had on a third moves to the nearest whole stop. Set it to ⅓ to go back to thirds. The meter's row of the scale still glides and still shows the thirds, so you can see where the reading really falls between two stops: if it sits two ticks past f/8, the light is closer to f/11, and the display says f/11. Film speed stays in thirds either way, since ISO 125 and 160 are real film speeds.

Hold

Tap anywhere on the viewfinder, press HOLD, or press either volume key, and the reading freezes, and so does the picture: the viewfinder keeps showing the scene the reading was taken on, the badge says HOLD and the circle turns orange. Lower the camera, walk to the tripod, the numbers stay put. Change the film speed, your value, the YOU SET switch or STOPS while it is held and the answer follows the held reading, the way the dial of a meter does. Tap again, or press HOLD or a volume key, to go back to the live picture and reading.

When the reading runs off the scale

If no value on the meter's scale fits, the answer rests on the end of its scale in red and the line at the bottom of the picture says why: Too dark for 1/1000 when even f/1 is not enough at that speed, or Too bright for f/1.4 when even 1/8000 lets in too much light. Next to it, a Try button offers the nearest whole stop of your value that brings the reading back, for example Try 1/60. Tap it to set it. An answer in red with no Try button means the spot itself is past what the phone's sensor can read exactly, and the line at the bottom of the picture says so. For a spot that is too dark, the real light is this dark or darker, so give at least the exposure shown: that speed or slower, that aperture or wider. For a spot that is too bright, the light is this bright or brighter, so give at most the exposure shown. Hold the reading to measure it properly: holding takes a slower, more exact reading of the spot, and the picture says Reading the bright spot or Reading the dark spot while it works. In deep shadow this can take a few seconds. If the number is still red afterwards, the spot is beyond what the phone can measure, and the same rule applies.

Film speed

Tap the ISO button under the display to pick your film speed from the full list, ISO 0.8 to 12800 in thirds of a stop, with the whole stops (100, 200, 400 and so on) printed heavier. Tap a speed and the list closes. Changing ISO takes a tap on purpose, so a brush of the thumb never changes your film speed in the middle of a roll.

Spot size

Pinch the viewfinder to zoom, from 1x to 8x, and the circle reads a tighter spot; pinch back out for a wider one. It opens at about 3 degrees and remembers your zoom. Dedicated spot meters use 1 degree, which on a phone's wide lens would be a dot too small to aim with.

A meter of its own

Like a hand-held meter, Simple knows nothing about the camera in your other hand: it does not read the camera, lens or film you selected. Its scales are the meter's own, the same on every phone: 34 minutes to 1/8000 and f/1 to f/360, in thirds of a stop or in whole stops. What you set in Simple stays in Simple and is remembered; the first time you open it, it starts from the film speed, shutter and aperture you already had. Nothing you measure in Simple is saved to the Shot Log. Only your meter calibration from Settings is applied. Filters, exposure compensation, zone shifts, bellows, expired film, multiple exposures and reciprocity stay in Classic and Paper, where you can see them. A reading you hold in Simple carries over when you switch theme, and the full app adds those corrections to it.

How it measures

The pixels inside the circle are averaged as light, the way a meter's cell adds it up, and where the phone allows it the camera sets its own exposure on the circle, so the spot is read near middle grey, where the sensor is most accurate. The reading updates with every frame, steadied just enough that the number does not flicker. Calibrate once against a meter you trust, and Simple and the other themes share it.

Implementation notes (for developers)
AppTheme.SIMPLE, persisted through Profile.themeName (no schema change). ui/SimpleMeterScreen.kt draws its own finder inside ViewfinderContent (MainViewfinderPreview is skipped; the shared dialogs stay), so CameraPreview now binds by repository.isBoundTo(view) and disposes with unbindIfBoundTo(view): a theme switch re-creates the PreviewView in either order safely. Simple is a plain meter and reads none of the selected gear: model/SimpleMeter.kt holds its own scales (SimpleScales, whole numbers of thirds of a stop in APEX, so aperture index + shutter index = 3 x EV at the set ISO): ISO -21..21 thirds from ISO 100 (0.8 to 12800, default 400), shutter -33..39 thirds faster than 1 s (34 min to 1/8000, default 1/125, no Bulb), aperture 0..51 thirds narrower than f/1 (f/1 to f/360, default f/8); labels are the engraved ones (past a minute, where the user times by hand, the exact time rounded to an easy number: 17m and 34m, not a dial's 15m and 30m), values the exact ones. SimpleSettings (priority, ISO index, shutter index, aperture index, fullStops) is the meter's own state, app wide in SharedPreferences director_finder_prefs (simple_priority, simple_iso_index, simple_shutter_index, simple_aperture_index, simple_full_stops default false, next to simple_spot_zoom and simple_scale_hint_seen), clamped on read, seeded once from the profile's ISO, shutter and aperture on the first entry after the update (Bulb seeds the default shutter), and never written to the profile; entering Simple no longer touches the profile. The ExposurePriority switch (SHUTTER: the user sets the shutter, the meter answers the aperture; APERTURE the other way) keeps the pair: the answered value becomes the set one when the reading was on scale. SimpleMeter.solve: calibration offset is the only correction, the answer is the nearest third, half a third of tolerance past either end of the answer scale still sets on the end, a quarter of a third of hysteresis before the live answer changes, TOO_DARK / TOO_BRIGHT rest on the end of the scale with fixIndex, the nearest whole stop of the set value that brings the answer back (null when none can), and clipped / crushed spots become SPOT_CLIPPED / SPOT_CRUSHED with their pair still worked out, a bound rather than a guess (give at most / at least this exposure): the screen shows it in the error colour, the scale's answer lane sits at it in the warning colour, and the hint pill and TalkBack say sm_clipped / sm_crushed; answerPositionThirds gives where the answer scale sits under the index (exact while the user drags, resting on the end of its scale when the reading runs off it). Whole stops (SimpleSettings.fullStops, the STOPS switch with segments 1 and ⅓): withFullStops(true) moves both set values to SimpleScales.nearestFullStop (a third down, two thirds up; every shutter and aperture end is a whole stop), withSetIndex and clamped keep them there, the answer is the nearest whole stop (SimpleScales.nearestDetent, stepThirds 3), and every margin of the solve scales with the step (half a stop of tolerance past an end, a quarter stop of hysteresis and of end hold), so the live answer does not flicker at a midpoint and the priority switch keeps the pair; the Try fix was a whole stop already; ISO stays in thirds; the scale's set lane clicks on whole stops only while its third ticks stay drawn, and the answer lane still glides continuously, so where the reading falls between two stops stays visible. SimpleMeterSmoother (median of three frames, then a 180 ms exponential average, a jump of 0.75 EV or more followed at once) and SpotRangeFlags (on/off gap). CameraRepository live spot: a disc of 16% of the finder width mapped through CoordinateTransform, summed through model/LumaResponse.kt (the one luma-to-light seam: the phone's reported TONEMAP_CURVE inverted when it gives one, else the shipped mapping, light proportional to Y with grey at Y 118), each analyzer frame paired with its own capture result by SENSOR_TIMESTAMP (ring of 16, a frame whose result is late is paired one frame later); the camera's AE region is put on the disc with a FocusMeteringAction (FLAG_AE, no auto cancel) and the main camera is bound (selectMainCamera). The finder zoom is Simple's own, hardware, 1x to 8x by pinch, default about 3 degrees (SimpleMeter.defaultZoom), saved in SharedPreferences simple_spot_zoom; recalculateZoom branches to applySimpleFinder in Simple and leaving restores the focal-length zoom. ViewModel state lives in standalone flows (D8 ceiling): simpleSettings, simpleReadout (published only when what is drawn changes), simpleHold (not persisted: a meter opens live), simpleEvShown, simplePairEv (EV at the set ISO of the shown reading, every frame), simpleMeasuring, simpleZoom, simpleScaleHintSeen. The scale updates the set value live while it moves (onSimpleSetIndexChanged) and persists once it settles (onSimpleScaleSettled); the Try chip applies fixIndex (onSimpleApplyFix); onSimpleFullStopsChanged sets the step and re-solves; while held, the live spot is ignored and a change of ISO, set value, priority or step re-solves the held reading. ui/SimplePairScale.kt is the calculator scale: one Canvas, shutter lane above aperture lane, about 62 dp a stop, whole stops labelled and thirds as ticks, shutter faster to the right so apertures open to the right, the set lane under a fixed index and the answer lane on a critically damped spring, drag with fling and settle on the nearest third, tap to centre a third, haptics on every third and firmer on whole stops (detents on whole stops only in whole stops), adjustable semantics for TalkBack (one detent a swipe), fast state read in the draw phase only. ui/SimpleMeterScreen.kt: the finder card (LIVE / HOLD badge, hint pill with the Try chip, corners painted by RoundedCornerMasks rather than a clip over the TextureView) and its display strip (EV, SHUTTER, APERTURE; the set value white at 28 sp, the answer in the accent at 44 sp, animated on a priority switch, scaled down to fit at large font sizes), then the ISO button (a 43-speed picker dialog), the YOU SET switch and the narrow STOPS switch in one row (YOU SET moves to a row of its own when a label would shrink below 65%). HOLD on a clipped or crushed spot runs measureSpotPro first: its manual exposure walk shortens the exposure for a saturated spot and lengthens it (then raises ISO) for a black one; a spot still black at the end of the walk is held as crushed at the darker of the two bounds. HOLD also freezes the picture: when the hold (or the pro reading) starts, SimpleMeterScreen grabs PreviewView.bitmap through CameraRepository.capturePreviewBitmap and draws it over the preview at the same size and in the same rectangular clip; release shows the live preview again and the bitmap is recycled two frames later (also when the screen leaves); a hold already on when the screen is built, or no bitmap, leaves the preview live. A frozen picture cannot be swept, so there is no held tone comparison. Leaving Simple hands a held reading to the full app (exposureReading, shutter priority on the profile's own shutter, ISO and corrections; Simple's set values are not carried over) and runs the normal solve. Simple never writes to the Shot Log. Choosing Simple from another theme in Settings > Theme opens the full-screen NoticeDialog it shares with the Red Light disclaimer, drawn as a warning (title sm_notice_title after a WarningAmber icon in the error colour, subtitle sm_notice_subtitle, Got it in the header; sm_notice_gear and sm_notice_log as Block-icon rows in NoticeWarningBlock, the errorContainer card with a 1 dp error border like the app's other warning cards; then sm_notice_back as a normal palette row; the Red Light disclaimer passes no titleIcon and looks as before; rememberSaveable state local to SettingsDialog, so app start and a profile switch never show it); the theme switches on the tap either way. Both volume buttons toggle HOLD in Simple (MainActivity.onKeyDown), instead of Classic's METER / exposure lock acting on a screen that is not showing. The tap spot and the pro escalation go through the same LumaResponse seam, so Simple and Single Spot / Multi-Spot / Auto Zones read alike. An sRGB curve in that seam was tried and measured worse on a Sony Xperia (its preview curve is near linear below grey: sRGB read Zones 0 to III 1.3 to 2.1 stops dark, 0.89 stops RMS against 0.39 shipped, 0.08 for the inverted TONEMAP_CURVE), so the seam now inverts the reported curve (2026-11-10, verified on the Xperia against a MeterLab sweep) and keeps the shipped mapping only on phones that report none.

Search documentation